22 reasons for motor heating

2021-06-19 08:40:58 64

What are the reasons for Motor Heating?

FSTpipe

  1. The room temperature is too high

  2. Poor heat dissipation

  3. overload

  4. Overvoltage, undervoltage or unbalanced voltage

  5. Frequent start and stop or frequent reversal

  6. Lack of phase

  7. The fan is broken or the air inlet and outlet are blocked

  8. Bearing lack of oil

  9. Mechanical jam

  10. The load moment of inertia is too large, the starting time is too long

  11. Short circuit between turns

  12. The internal wiring of the new motor is incorrect

  13. Wrong star-delta wiring

  14. Star-delta or self-dual step-down start-up load restart time is long or abnormal conversion due to fault

  15. Motor is damp

  16. Broken bar of squirrel cage asynchronous motor rotor

  17. The rotor winding of the wound asynchronous motor is broken or the resistance is unbalanced

  18. Rotor sweep

  19. Power harmonics are too large, such as large rectifier equipment, high frequency equipment, etc. nearby

  20. The magnetic flux of the motor core after repeated maintenance is reduced

  21. Some motors have poor winding technology

  22. The high temperature of the motor is generally unlikely to be a bearing problem, unless the bearing temperature is too high


广东福斯特流体技术有限公司
版权所有 2019 粤ICP备14076538号-1

咨询更多

  • 时间:周一~周六:
    8:00-18:00
  • 电话:0757-82259998
  • 传真:0757-82258779
  • 地址:广东省佛山市禅城区
    华富北路3号
电话咨询
邮件咨询
在线地图
QQ客服